Camera Track. Digi Dolly Pro.

Quick, compact and easy to assemble. Used in conjunction with a tripod.

Kit
1 x “T”- Bar dolly with fixed Hi-Hat
8 x aluminium track, 1000mm lengths
8 x foam suspensions, 1000mm lengths
2 x track separators
1 x soft bag

There are no tools required to put the Digidolly together. Every component slides together and is held by a single threaded bolt – saving yet more time.

Most camera operators know that not all shots taken on a dolly are wide shots. An accessory for the Digidolly is the amazing “Stand-On Plate”, which slides onto the dolly in a second. The operator can therefore put their eye right up to the eyepiece of the camera and use the controls of the camera with ease. This feature is unique to Digidolly.

The Digidolly features a foam cushioning system that allows the digidolly to be set up anywhere in minutes.

The digidolly comes with a low-level camera mount (100mm bowl), which is already attached to the dolly for your convenience. Different size bowls can be fitted.

The Digidolly has 3 elastic foot straps which connect to your tripod feet. This ensures your tripod will never come away from the Digidolly.

The track separators, with built in stoppers, keeps the track in line and square. This takes the guesswork out when arranging the track on the ground. The operator can then place the dolly down on the track with speed. The stoppers on the track separators do just that – STOP. If there is a decline in the position where you have set up your digidolly, the separators will stop the dolly from going of the track. Having the track separators connected means you can pick the track up in its entirety and move to the next location for your next dolly shot; saving more time.

More information at http://www.digidolly.com.au/